[Badger] Framer Set

Badger’s take on the big American framing rig, the FSU. The Framer Set will provide plenty of room for your tools and fasteners while cutting back on trips to refill. All Framing Sets come with a contoured belt with metal COBRA® buckle to help support and distribute the added weight framers are required to carry. Currently all FSU sets come in our XL size bags. We feel it suits the needs of the professional framer best in this size. These are our longest bags at about 17″ from top to bottom. Keep that in mind if length is a concern

American made foam, various military-grade tactical webbings designed to be both lightweight and abrasion-resistant, plastic and metal military hardware and heavyweight military thread

Lightweight tough and built to last. We firmly believe Badger offers the most well built and durable nylon tool belts available anywhere. 

Our metal COBRA® buckles are the only component in our system that we welcome as foreign-made. But, to soften the blow on that, the US government has made a waiver to the Berry Amendment (military must use and wear only domestically made gear) to allow the use of the Austrian made buckles throughout the US military simply because they are that good

• Hammer sleeve on tool side
• Tool side: Tape pouch, 5 tool slots in main pouch-three along inside back and two inside front, two stacked lower pouches with tool slot in the middle one, rear tool loop. Pencil/utility combo up front with three narrow slots and one deep pocket.
• Fastener side: Tape pouch with 4 interior 1″ wide elastic slots, speed square slot in main pouch with wide tool slot below, fastener pouch with slot, lower fastener pouch, two front tool pockets, 2 stacked rear tool slots and a reinforced bar sleeve on the underside of the bag.

As with all Badger bags, the bottom of the main and fastener pouches are reinforced with USA made tactical webbing to increase puncture and abrasion resistance.

1000 Denier CORDURA® Nylon fabric with water repellent coating